Siemens PLM NX 7.5.5.4 MP02 (Multil-SSQ)

Requirements for updates: Siemens PLM NX 7.5.5.4
Interface: Multilanguage
Version: 7.5.5.4 MP02 Upgrade
Name: Siemens PLM NX

What fixed in NX 7.5.5.4 MP01
Arepleased we inform you that the patches are available for the problems listed below. This maintenance pack fixes an accumulation of problems listed in the table below.

This Maintenance Pack (MP2) adds integration to Teamcenter Teamcenter support for NX 9.1. See note to update MP2 below for an additional step recommended to avoid problems with your Java applications due to the installation files to the new version jar SOA.

The problem in the manufacturing sector where an operation of the plant model with a flat cutting using profile cutting moves, and Cutcom not created the incorrect tool path is fixed.
The problem in the fusion of knowledge, where-andgt Preferences, Grid and work plan were dimmed after the addition of part reuse is fixed.
The problem in the manufacturing industry where performance has been slow for a milling operation cavities using verification holder, and very shallow depth of cut is improved.
The problem where the geometry of the section has not been selected for PMI associated objects is fixed.
The problem in manufacturing, where Turning suboperations Teachmode do not select the object in the context of an assembly is fixed.
The problem in advanced simulation with the integration of Teamcenter NX where naming rules does not work properly for types of elements of CAE is fixed.
The problem where the system clipboard to copy / paste functions did not work regularly while running NX is fixed.
The problem in the mold where Rename Components Wizard does not always assign sequence numbers is fixed.
The problem on Windows 64 platforms where NX functions did not correctly connect to Microsoft Office Outlook to send email is attached.
The problem in the assemblies where the replacement of a component in the assembly which was opened ''Structure Only'' has caused an error is fixed.
The problem in manufacturing, where Turning ''direct hire / retract'' did not stop the tool at the respective point of filling is set.
The problem in writing where fixed contours extracted Render associated with objects became invisible writing is fixed.
The problem in manufacturing where assembly of Moves in a non-cutting operation Teachmode who uses a tool library has caused an error is fixed.
The problem where the closure of several parts, while in manufacturing has caused an error is fixed.
The problem in manufacturing, where the selected display objects of the preference parameter caused an error when closing a portion is fixed.
The problem when loading the ''Materials the'' palette was slow when changing the displayed portion is fixed.
The problem where editing the file name card reflecting materials has caused an error is fixed.
The problem where the preview in the ''Materials in the'' resource model does not reflect the alterations done with NX Open program is fixed.
The problem when updating a scene visualization was slow when the login name of the user contains a period (.) Character is fixed.
The problem where the annotation was not imported into a drawing to the correct location is fixed.
The mold problem in the wizard where the Create a Pocket created in the upper assembly, Subtract characteristics which subsequently failed to update is fixed.
The problem in modeling, where few lines of tangency constraints lost ending after updating the model is fixed.
The problem in modeling, where the removal of an item unrelated upstream caused a characteristic curve downstream composite bound to have a broken link status is set.
The problem in the Message Generator manufacturing where recording a message legacy removed the last shot of an event GoHome is fixed.
The problem in Routing where editing a spline incorrectly create replacements position in the components attached is fixed.
The problem in creating a weld point where no overlap was created when the reference sheet option was set to Overlap is fixed.
The problem in the assemblies where performance when loading assemblies containing stress center has been slow has been improved.
The problem in the manufacturing industry where the race file Simulate Machine Code on a 19MB file caused an overflow error memory is fixed.
The problem in writing, where the size of the text of a label is attached PMI was incorrect.
The problem in writing where PMI inherited annotations were not properly aligned in the drawing is fixed.
The problem in writing where symbols, and reference symbols GDandT are not exported correctly by the translator of 2D exchange is fixed.
The problem in writing which lacked a central axis as a result of a translation exchange 2D is attached.
The problem in the integration of Teamcenter NX where entry ''Unit Number Set'' in the rule revision Charging Options Assembly did not accept a valid unit number is set.
The problem in the DXF-DWG where some dimensions have been deformed is fixed.

ATTENTION!
It's Update only for NX 7.5.5! To install it you need NX 7.5.5 with SSQ's crack to be pre-installed!